Uni Tradeblog

My knowledge and years of experience from the Wall Street

Messvorrichtung

Die Messvorrichtung, ein Garant für die maßgenaue Produktion

Fertigungsbetriebe, die sich auf die Herstellung von Werkstücken spezialisiert haben, arbeiten mit hochpräziser Messtechnik. Die Messvorrichtung ist das wichtigste Element für die maßgenaue Fertigung, denn sie gibt genaue Auskunft über die Maßgenauigkeit des einzelnen Werkstücks. In diesem Beitrag wird kurz erläutert, was es mit der Mess- oder Spannvorrichtung auf sich hat und welche Fertigungsbereiche von der Vorrichtung profitieren.

Was ist eine Mess- oder Spannvorrichtung?

Eine Messvorrichtung wird auch Spannvorrichtung genannt und ist der Oberbegriff für sämtliche Messgeräte und zusätzlicher Prüfungskomponenten. Die Vorrichtung liefert zeitgenaue Messergebnisse und hält das Werkstück an Ort und Stelle. Die Vorrichtung enthält eine empfindliche Prüftechnik, die hochpräzise Messdaten während der Fertigung liefert. Verschiedenste Hersteller bieten spezielle Spannvorrichtungen für individuelle Bauteile. Eine solche Vorrichtung arbeitet mit unterschiedlichen Messinstrumenten und Messuhren, um ein maßgenaues Ergebnis liefern zu können. Die Messvorrichtungsbauteile messen die Höhe der Werkstücke oder die Rauheit der Oberfläche. Zudem prüfen die Vorrichtungselemente die symmetrischen Voreinstellungen, die Winkelmaße oder dienen als Einstellhilfe. Die Messhilfen sind unverzichtbar im Bereich der Präzisionsfertigung und kommen in zahlreichen Produktionsbereichen zum Einsatz.

Messvorrichtung

Wozu braucht man eine Mess- oder Spannvorrichtung?

Eine Messvorrichtung misst und prüft die Maßgenauigkeit der einzelnen Fertigungsteile während der Produktion. Die Mess- oder Spannvorrichtung gibt die Messdaten zuverlässig weiter, sodass der Maschinenführer rechtzeitig in den Fertigungsprozess eingreifen kann. Dank der Messdatenübermittlung ist es möglich, die Abweichungen zu korrigieren. Zudem dient das Bauteil dazu, die zu bearbeitenden Werkstücke in der gewünschten Position zu halten. Die Vorrichtung bietet enorme Vorteile, denn der Produktionsprozess kann einfacher kontrolliert und überwacht werden. Bei abweichenden Prüfergebnissen ist ein schnelles Eingreifen möglich, sodass der Fertigungsprozess ungehindert fortgeführt werden kann. Die Mess- oder Spannvorrichtung ist mit unterschiedlichen Messtechniken kombinierbar und kann folgende Messtechniken aufnehmen:

– taktile Messgeräte z.B. Koordinatenmessgerät (KMG)
– optische Messtechnik z.B. Lasertechnik oder Kameraprüftechnik
– pneumatische Messgeräte z.B. Differenzdrucktechnik, Messdüsen
– Druckmesstechnik
– Drehmomentmessinstrumente

Wer braucht eine Mess- oder Spannvorrichtung?

Fertigungsbetriebe und Lohnunternehmen brauchen für jedes Bauteil eine Mess- oder Spannvorrichtung, um eine maßgenaue und präzise Fertigung garantieren zu können. Verschiedenste Produktionsbereiche können ohne die Messtechnik nicht arbeiten und sind auf die Einstellhilfen, Messinstrumente und Maßangaben angewiesen. Eine Mess- oder Spannvorrichtung braucht ein Unternehmen, wenn es im Bereich des Fahrzeugbaus tätig ist. Betriebe, die sich auf die Herstellung von Präzisionstechnik oder Präzisionswerkzeuge konzentrieren, können ohne Messtechnik nicht auskommen. Auch im Bereich der Luft- und Raumfahrt und in der Medizintechnik, kann man auf die Messdaten und die Prüfsysteme der Messvorrichtungsanlagen nicht verzichten. Die Messinstrumente können z.B. Mikrostrukturen erkennen, Körpermessungen, Hohlraummessungen oder Gehäusemessungen durchführen und können miteinander kombiniert werden.

Reinigung

Für Menschen die Ihr Auto lieben

Menschen, die ihr Auto lieben, kaufen gerne die Marke Hagerty. Hier finden sich Polituren und mehr, für ein gepflegtes Äußeres des Autos. Die Marke stammt aus den USA und wurde schon 1895 gegründet. Auch Reiniger für Schmuck, Feinsilber oder Besteck sind von diesem Farbrikat erhältlich.

In der Schweiz

Die Firma ist in der Schweiz ansässig seit nunmehr 120 Jahren und in über 70 Ländern gibt es Filialen. Hier werden für das Auto oder den Schmuck Pflegeprodukte entwickelt. Auch für Uhren, Dekorationsartikel und Accessoires, Teppiche und Textilien sowie Multi-Oberflächen steht das Unternehmen. Das üppige Pflegesortiment umfasst aber auch die perfekte Pflegepolitur fürs Auto. Heute ist das Unternehmen auf drei Kompetenzebenen tätig: Bodenpflege (Floor Care), Home Care (Heimpflege) und Personal Care (Pflege der Preziosen oder des Autos).

Auto

Grundsätzliche Tipps

Wer sein Auto liebt, pflegt es. Hier einige grundsätzliche Tipps für die Autopflege. Gerade im Frühling muss man erst einmal den Schmutz des Herbst oder Winters entfernen. Zuerst wird mit dem Hochdruckreiniger vorgereinigt. Oder man verwenden den klassischen Wasserschlauch. Denn der harte Strahl des Hochdruckreinigers kann auch die Reifen beschädigen. Danach säubert man die Scheiben innen und außen. Die Felgen können ebenfalls mit dem Schlauch oder Hochdruckreiniger gesäubert werden. Anschließend wäscht man das Auto und schwierige Stellen werden von Hand gereinigt. Der Lack des Autos wird so aufgefrischt. Die gründliche Reinigung und Pflege ist für den Liebhaber ein Muss. Auch beim Profi kann man sein Auto aufbereiten lassen. Mit etwas Geschick lässt sich allerdings auch selbst Hand anlegen und der Zustand der Autos in einem Schritt-für-Schritt-Programm wieder verbessern.

Polieren, Wachsen und mehr

Hier hilft, das Auto regelmäßig nach dem Waschen zu polieren und zu wachsen. Die gründliche Fahrzeugaufbereitung verbessert die Optik maßgeblich und zahlt sich auch bei einem eventuellen Verkauf wieder aus. Wer in die Waschstraße fährt, kann bei intensiver Verschmutzung auch zwei Gänge wählen, damit man ein sauberes Ergebnis erhält. Mit dem Hochdruckreiniger kann man im Abstand von 30 Zentimetern das Auto vorreinigen. Er entfernt dann den groben Schmutz, das ist vor allem im Winter wichtig. Denn hier kann das Streusalz den Lack und den Unterboden schädigen. Die Feinwäsche von Hand kann folgen und hierfür braucht man einen Schwamm, lauwarmes Wasser und ein Auto-Shampoo. Dabei sollten auch die Einstiege nicht vergessen werden. Wer hier gründlich vorreinigt und mit einem Mikrofasertuch den gröbsten Schmutz entfernt, wird schnell Erfolge sehen. Autopolituren von Hagerty sind hochwertig und beliebt. Es finden sich vielfältige Produkte im Baumarkt, die helfen, ein sauberes Auto zu behalten. Die Gummimatten kann man hinterher mit Cockpitspray auf Hochglanz bringen. So verschwindet auch hier nach der Reinigung die Mattigkeit. Der Staubsauger ist in der Akku-Variante praktisch, wenn man zwischendurch zu Hause das Auto reinigen möchte. Mit sauberen Fensterscheiben und speziellen Produkten, die stärkere Verschmutzungen entfernen, wird das Auto perfekt sauber.

Weitere Reinigungsprodukte finden Sie unter:

Mit einer gereinigten Maschine schmeckt der Kaffee gleich viel besser

Die professionelle Autopflege – Hochwertige Reinigung des PKWs

Stone

Stone veneer for the stylish interior and exterior design

The so-called Stone Veneer was launched surprisingly early on. For while it was officially conceived for the first time at the end of the 19th century, various much older traces of it can be found in ancient buildings, such as the Colosseum. The focus is that the beauty of stone can be integrated into buildings by its simple texture and minimal weight without straining it in weight. Thus, the so-called stone veneer is used today in all sorts of areas and exudes elegance through the individual design of the individual stone types.

Other terms for Stone Veneer

  • Stone veneer
  • Thin slate
  • Faux stone

Benefits of Stone Veneer

Stone veneer is available cost-effectively and allows you to beautify your interior and exterior with stone look. The individual veneers are even flexible and can be applied quite flexibly. But that doesn’t take away their sophistication and quality! Because while there is only a thin layer of stone, the veneers, on the foil, you benefit from all sorts of advantages of stone. The surface is therefore easy to clean and particularly durable. As a result, stone veneers are also suitable in the garden area.

Stone veneer for indoor use

The interior is designed in stone optics. This applies to all kinds of areas and spaces, such as:

  • Bathroom and toilet
  • Living wall
  • Preamby
  • Wall behind the bed

Because if the stone slate is applied gracefully, you can provide unique and noble highlights with it. In this sense, the stone veneer is particularly popular for creating a contrast indoors. In addition, entire walls and floors can also wear the look. However, care must be taken to ensure that the stone optics do not take over the upper hand here and thus take away the relaxed sense of space. So you’d rather rely on contrasts with stone veneer.

Stone veneer for outdoor use

Stone veneers can also be used in many different areas. After all, we like to pay attention to unique and beautiful concepts. At the same time, the texture and stability of the material are ideal for the harsh conditions of the outdoor area. In this sense, the stone veneer can also be used in the bathroom. There, they dress all the walls, while providing more aesthetics. If the stone veneer is applied to the facade, the advantages are that the weight is not loaded. In addition, the stone veneer is also suitable for designing objects, such as your outdoor oven and your barbecue area. Accordingly, thin slate can be used as a covering for walls as well as floors.

Stone veneer for all tastes

Also in the field of stone veneers you will find all kinds of designs and designs, which differ from product to product. The stone veneer can be made of both natural stone and artificial stone. With very high-quality products, it is even possible that even experts do not recognize the differences. But at the latest when you call it, you know. Because if you opt for stone veneers in your interior or exterior, you orientate yourself on the material yourself. Mica slate, for example, provides elegant glitter effects, while marble with its noble texture is particularly popular. In addition, you will also find the various wood veneer panels at various retailers. For more sophistication in the optics, the models can even be translucent, which provides highlights especially in the commercial sector.

How is Stone Veneer mounted?

Due to its flexible nature, thin slate is suitable for particularly easy assembly, which you can usually also perform as a layman. For example, there are often self-adhesive products in which you simply have to remove the protective film and attach the stone veneer to the wall.

What should I consider when using Stone Veneer?

In the end, stone veneer is very often natural stone. This, in turn, is not suitable for every area under all circumstances. For this reason, read into the most diverse uses of the selected product. For example, limestone is not suitable for use in wet rooms.

Where can I get Stone Veneer?

The so-called faux stone is usually found in conventional DIY stores. Here you get the thin slate for little money. At the same time, you can take a look at classified ads online. Time and again, stone veneers are left over from private individuals when covering the wall and ceiling.

Look here:

A natural material with a honourable character

Dry Ice

What is Dry Ice Blasting for Cleaning?

Dry Ice Blast Cleaning is generally used to ensure that the stubborn contamination is removed in an environmentally friendly manner. Many different surfaces can finally be cleaned with the help of the so-called dry ice rays. Many different dirt can be removed, such as ivy on the front of the house or the chewing gum on the sidewalk. Even graffiti or, varnishes or weathering are no problem for Dry Ice Blasting. Different dirt on different surfaces is therefore no problem. It is important that all this works without damaging the surfaces. The process is therefore very popular in various areas.

What is Dry Ice Blast Cleaning used for?

The underbody of vehicles is often cleared of dirt and the interior can also be treated. The climbing plants can be removed from the house facades and the rays can also be used for the construction and wood wasteland. Dry ice is generally the solid state of carbon dioxide. The substance sublimates at approximately minus 78.5 degrees Celsius from the solid to the gaseous state. During the phase transition, the dry ice therefore jumps into the liquid state of the aggregate. Therefore is no liquid or solid blasting material left after dry ice blasting, see more at White Lion. For cleaning, pellet-form dry ice is possible, and this is the pressed carbon dioxide snow. In general, the process is part of the compressed air blasting process and at high pressure the dry ice is shot onto a surface that is to be cleaned. The particles get onto an object very quickly and thanks to the temperature difference, the layer is then cooled and brittle. Cracks are formed in the layer and the particles settle in it. With the carbon dioxide, the volume is then greatly increased and the layer to be removed is then detached.

Important information for Dry Ice Blasting

If the procedure is applied correctly, the surface will not be damaged. A removal of the material therefore does not take place. The facades can therefore be cleaned gently, for example, and the insulation is not damaged. The duration of the process depends on the degree of contamination and on the effort of cleaning work. The procedure can then take a few minutes or even days. The advantages of the procedure can outweigh the benefits. The surfaces are therefore gently cleaned, the application area is wide and there is no moisture or moisture during the process. It is also important that the process is not electrically conductive. Only the soft materials cannot be blasted with it. Objects do not have to be removed, jet material does not remain over, the process is environmentally friendly, it is a cheap compressed air blast process and it is gentle on humans.

Thin Stone from Slate Lite

A natural material with a honourable character

It can be very hard to find the right material for your living room. You want to use something special that can be long-lived? Thin Stone fulfills this point. You can benefit from this contribution. The great look convinces every day. So don’t waste your time. The stone guarantees a low workload and convinces with the end result!

Thin Stone from Slate Lite

Available in all shades!

The stone looks very appealing and will be welcomed with goodwill from the viewer. You can describe it as modern classic that still arouses interest and simply looks magnificent. So just make yourself comfortable and take advantage from this offer!

burnt wood

Eco-friendly with burnt wood build

Wood is an environmentally friendly and sustainable raw material that is popular not only in the construction of furniture, but also in house building. Here especially in the cladding of facades. But the raw material wood also needs a lot of care. But with burnt wood cladding there is also a very special form of surface treatment of wood, as can be seen from the following article.

For this reason burnt wood cladding

If untreated wood is exposed to the weather, moisture can quickly lead to considerable problems. This can be mold, for example, but also color changes in wood. In the long term, the wood becomes rotten and decays. Regular wood protection is mandatory to ensure that this does not happen. If you don’t want to invest this time in wood protection, but at the same time you don’t want to do without wood as a raw material, there is the possibility of burnt wood cladding. This is usually larch wood, in which the surface is specially treated. The surface treatment not only ensures that one has no problems with insects or, for example, with mould, but also does not result in color changes. The color of this wood is always the same, namely black. And you can’t change that, you have to be aware of this when you choose this wood.

The topic japanese burned wood is also interesting

This is what is called burnt wood cladding

The black appearance in burnt wood cladding is created by the fact that the surface is flamed by the wood with fire. It is precisely through this flame that the surface structure of the wood changes. On the one hand, this change in the surface structure ensures that the wood can no longer be attacked by insects. However, it also dissipates moisture or rain. However, it is important to know that the statics of the wood are not affected by this. The wood has the same strength afterwards. The flame is limited to the surface of the wood. When assembling this wood, there is no need to pay attention to anything big. Like normal wood, it is easy to assemble. You only have to be careful in the places where you cut the wood. On these head sides you would then no longer have any flame. This is not a problem in connection with the assembly, as this area can be easily inflamed with a small burner. This is how you have the same effect on wood.

Care at burnt wood cladding

Of course, even with this wood with the special surface treatment, the question arises whether it needs to be maintained. And this question can be clearly denied. Due to the burnt surface alone, no care is necessary here. It is precisely because of this circumstance that burnt wood cladding is attractive, but also because of the framework data such as environmental friendliness and sustainability.

You can also find out more about this topic at https://nakamotoforestry.co.uk/burnt-wood-cladding/

Charred wooden facade looks a bit mysterious

Charred wood siding captivates more and more people. The effect of black wood simply has something very special. Whether just a section of a house wall, or even an entire facade. Demand for charred wood design is steadily increasing.

Charred wood siding in authentic Yakisugi (Shousugiban)

Close-up of a charred facade

What you need to know about contract filling

A pay filler can implement the individual wishes of the customer effectively and quickly. This involves the filling of the emulsions, liquids, pastes, powders and fats. With the help of a modern machine park, the contract filler carries out fully automatic fillings in small quantities and in high quantities. In addition, it offers the filling and screwing of the bottles with different filling quantities. It is also a filler for special and special fillings, for example under EX conditions. This refers to the filling of flammable liquids and materials. However, contract filling, also known as contract filling, is subject to careful quality controls. The employees in the quality management system are DAR and ISO certified.

Contract Filling

In addition to the contract filling, the contract packaging

Through the contract filler, not only contract filling takes place, but also the contract packaging of the customer products, be it in the display or in the recyclable carton. Furthermore, the bottling company labels the contract packaging and the product according to the existing templates or according to the wishes of the customer in close cooperation with a printing company. Even coding or embossing the bones of glass, polyvinyl chloride, polyethylene or another material is part of the all-round service of the contract bottler. In addition, he takes over the storage and logistics of cosmetic and chemical-technical products, as well as hazardous goods and substances. The bottler delivers reliably and quickly not only domestically, but also worldwide. The customer can use this comprehensive service to save valuable time.

Precise contract filling by modern devices

In order to meet its high-quality standards, the contract filler has a modern machine park with some fully automatic filling lines. These include, for example, a system with six test points for precise contract filling of the bottles, a bottle screwdriver with automatic torque detection for spray guns and trigger bottles, or a labeling device with thermal transfer pressure. The excellently trained specialists of the contract filling company are responsible for operating the special machines. Each machine undergoes regular maintenance and inspections to prevent material wear and conditions and to deliver consistently high quality.

General information about contract filling

In general, it is possible to divide contract filling into the food, cosmetics and chemical industries. The range of articles in chemical-technical contract filling starts with cleaning products and household cleaners. It ranges from paints, varnishes and adhesives to fertilizers and bulk materials. The fillers may be pastes, liquids, granules or powders, among others. Various companies use the expertise of the contract bottler to outsource the filling and packaging of their own products. As a result, the bottling company’s customers can save not only storage space and costs, but also valuable time, so that they can focus on other critical areas, such as marketing and sales.

Shousugiban – fire-treated wood

Shousugiban is an old variant of wood preservation. The Shou Sugi Ban process protects the wood from rot and insects. Through the controlled charring of the outer layer of wood, the material is preserved. The coal thus forms a natural protection against fungi or vermin. Paint scoatings or chemical wood preservatives are no longer necessary after the Shou Sugi Ban treatment. Click here and learn more: https://nakamotoforestry.co.uk/shousugiban/

shousugiban is tradition

Shousugiban – production is not easy

Information about private label

The word private label is translated as trademarks. The products are specially made for the dealers and then provided with the brand’s own name. In general, private label is on the rise and the popularity continues to increase. Originally, this trend comes from the US and the business model is very popular among solo singers. This is particularly because it should be possible to generate considerable income within a short time. Especially in America, there are many entrepreneurs who have taken the steps to self-employment with the products. Private Label is also becoming increasingly popular in Germany.

 

Important information for private label

Private Label is the product that has been slightly customized and will be sold as a private label. E-commerce retailers then commission the products in popular factories and may be USA, China or other European countries. In the case of the available products, generally only little is adapted for the production and afterwards the own brand label is applied to it. For example, if it was Nike shoes, there would just be another name on it. The important thing, of course, is that the rights of Nike are not violated. However, many of the products are much simpler than the sneakers and therefore production is possible without any problems. The owner of the own brand is the private label seller and then all products are checked, which come with this name on the market. A private labeler must therefore always ensure that the brand is known.

 

What is to be considered for Private Label?

In sales, it is often possible that hardly any work for the private labelers incurred. For example, Amazon does not have to do a lot of work on its own. Often everything can be controlled directly from home and often no production facilities or employees are needed. The seller access, for example, Amazon is not expensive and depending on the product, there are still the cost of ordering goods. If label and packaging are designed by yourself, then you can start with relatively little money. Especially for young entrepreneurs, the small starting capital is very advantageous. The best thing is, however, some start-up capital available, so that the costs are covered and the career with sufficient order of goods is started. Your own warehouse is not needed because the service can usually be taken over. After working time is saved, Private Label is generally also a flexible model. In general, efficiency and creativity also matter at Private Label.